Connecting/Disconnecting A Mobile Phone - Mercedes-Benz COMAND Operating Instructions Manual

Procedure and general information
Searching for and authorizing (connect-
ing) a mobile phone
Before using your mobile phone with
COMAND for the first time, you will need to
search for the phone (
authorize it ( page 106). Depending on the
Y
mobile phone, authorization either takes
place by means of Secure Simple Pairing or
by entering a passkey. COMAND automati-
cally makes the system suitable for your
mobile phone available. You can recognize
Secure Simple Pairing by a code which is dis-
played in COMAND and on the mobile phone.
You can recognize the passkey system by the
fact that you have to enter a code on the
mobile phone and in COMAND. The mobile
phone is always connected automatically
after authorization.
If COMAND does not detect your mobile
phone, this may be due to particular security
settings on your mobile phone. You can also
start the search procedure and authorization
on the mobile phone (
Device-specific information on authorizing
and connecting Bluetooth
phones can be found on the Internet at
http://www.mercedes-benz.com/
connect.
You can authorize up to 15 mobile phones.
Only one mobile phone can be connected to
COMAND at any one time.
De-authorizing (disconnecting) a mobile
phone
The connection is terminated automatically if
you leave the receiver range of COMAND or
®
deactivate Bluetooth
If you no longer want the Bluetooth
tion to be established automatically, the
mobile phone must be de-authorized (discon-
nected) ( page 108).
Y

Connecting/disconnecting a mobile phone

page 105) and then
Y
page 107).
Y
®
-capable mobile
on your mobile phone.
®
connec-
Searching for a mobile phone
To call up the telephone menu: press the
X
% button.
To switch to the menu bar in the telephone
X
menu: slide 6 the controller.
To select Connect Device Connect
X
troller and press to confirm.
The device list is displayed.
To select Search for Search for Phones
X
press the controller.
A message is displayed that Bluetooth
must be activated on the mobile phone and
must be made visible to other devices.
To select Start Search Start Search
X
troller.
The available mobile phones are displayed
in the device list.
The duration of the search depends on the
®
number of Bluetooth
range and their characteristics.
If a new phone is found, it appears in the
device list with the Ï symbol. You can now
authorize (connect) the mobile phone found
( page 106).
Y
If the device list is already full, you will be
requested to de-authorize a mobile phone
( page 108).
Y
When you call up the device list again, de-
authorized devices will be removed from the
list. To update the device list, start the search
again.
Device: turn the con-
Phones: turn and
®
: press the con-
telephones within
Z
105