Mercedes-Benz COMAND Operating Instructions Manual page 42

WLAN
40
Connecting a device via WPS PIN
Prerequisite:
For this type of connection, the device to be
connected must support "Connect using WPS
PIN".
To select Vehicle Vehicle
X
bar: turn and press the controller.
To switch to the menu bar: slide 6 the
X
controller.
Select System Settings System
X
The System Settings System Settings
Select WiFi WiFi.
X
The WLAN menu appears.
Select Connect via WPS PIN Connect via WPS
X
Select the vehicle from the device to be
X
connected and "Connect using WPS PIN".
The vehicle is displayed with the SSID
WLAN XXXXX WLAN XXXXX.
The device to be connected generates a
PIN.
This PIN is also entered on COMAND.
X
Connecting the device by pressing a
button (push button)
from the main function
Settings.
menu is displayed.
PIN.
Prerequisite:
For this type of connection, the device to be
connected must support "Connect via push
button".
To select Vehicle Vehicle
X
bar: turn and press the controller.
To switch to the menu bar: slide 6 the
X
controller.
Select System Settings System
X
The System Settings System Settings
Select WiFi. WiFi
X
The WLAN menu appears.
Select Connect via WPS Connect via WPS PBC
X
Select the vehicle from the device to be
X
connected and
The vehicle is displayed with the SSID
WLAN XXXXX WLAN XXXXX.
Select Continue Continue
X
Connecting the device via a security key
MB MB
To select Vehicle Vehicle
X
bar: turn and press the controller.
To switch to the menu bar: slide 6 the
X
controller.
Select System System Settings
X
The System Settings System Settings
Select WiFi WiFi.
X
The WLAN menu appears.
Select Connect Using Security Connect Using Security Key
X
Select the vehicle from the device to be
X
connected. The vehicle is displayed with
the SSID MB WLAN MB WLAN XXXXX
from the main function
Settings.
menu is displayed.
PBC.
Connect via WPS Connect via WPS PBC PBC.
in COMAND.
from the main function
Settings.
menu is displayed.
Key.
XXXXX.
MB MB