Mercedes-Benz COMAND Operating Instructions Manual page 106

Connecting/disconnecting a mobile phone
104
Symbol ; shows the current signal strength
of the mobile phone network. If all bars are
filled, you have optimum reception.
If the bars are not filled, you have very poor
reception or no reception at all.
i
Receiver icon shows whether a call is
active/being connected ¡ or not ¢.
To call up the telephone menu: press the
X
% button.
To show the menu bar: slide 6 the con-
X
troller.
If the mobile phone connected supports the
MAP Bluetooth
Profile), the 1 menu item is available. Fur-
ther information on text messages and e-mail
( page 127).
Y
If you have an unread text message or e-mail,
the 0 mail symbol is displayed at the top
in the status bar. The symbol disappears once
you have read the text message or e-mail. The
ú symbol is displayed as soon as the mes-
sage memory on the mobile phone or SIM
card is full. The symbol disappears once you
delete at least one message.
Connecting/disconnecting a mobile
phone
Prerequisites
For telephony via the Bluetooth
you require a Bluetooth
phone. The mobile phone must support
Hands-Free Profile 1.0 or above.
On COMAND
Activate Bluetooth
X
On the mobile phone
Switch on the mobile phone and enter the
X
PIN when prompted to do so (see the man-
ufacturer's operating instructions).
Activate Bluetooth
X
®
Bluetooth visibility for other devices (see
the manufacturer's operating instructions).
®
profile (Message Access
®
interface,
®
-capable mobile
®
( page 42).
Y
®
and, if necessary,
This visibility is for restricted periods of
time on some mobile phones (see the man-
ufacturer's operating instructions).
®
Set the Bluetooth
X
mobile phone if necessary.
®
The Bluetooth device names for all of one
manufacturer's products might be identical.
To make it possible to clearly identify your
mobile phone, change the device name (see
the manufacturer's operating instructions).
The name can be freely selected.
If the mobile phone supports the PBAP
(Phone Book Access Profile) and MAP
(Message Access Profile) Bluetooth
files, the following information will be trans-
mitted after you connect:
Phone book
R
Call lists
R
Messages
R
The battery of the mobile phone should
always be kept sufficiently charged in order
to prevent malfunctions.
i
Not all mobile phones available on the
market are equally suitable. You can obtain
more detailed information about suitable
mobile phones and about the connection
between the mobile phone and COMAND
on the Internet at
http://www.mbusa-mobile.com.
You can also obtain more information by
calling.
In the USA, you can get in touch with the
Mercedes-Benz Customer Assistance
Center on 1-800-FOR-MERCedes
(1-800-367-6372).
In Canada, you can get in touch with the
Customer Relations Center on
1-800-387-0100.
i
Some displays (e.g. the signal strength)
depend on the supported version of the
Hands-Free Profile.
device name for the
®
pro-