Mercedes-Benz COMAND Operating Instructions Manual page 118

Address book
116
Saving a contact
Saved contacts are indicated in the phone
book by different symbols (
Search for a contact on the mobile phone
X
d ( page 114).
Y
To select G: slide 9 the controller.
X
To select Save Save: turn and press the control-
X
ler.
The contact has now been saved. The con-
tact is identified by the ¥ symbol in the
phone book.
i
Saved contacts are also displayed in the
address book.
Saving or editing the contact data on
COMAND does not change the contacts on
the mobile phone. If automatic calling up of
phone contacts is activated, COMAND dis-
plays the copy ¥ with the changed data.
To add additional data, such as additional
phone numbers or e-mail addresses, select
this contact. In this way, you avoid creating
additional copies of the mobile phone
entry.
Deleting the contact
You can delete contacts that have been
added, supplemented, saved or imported in
COMAND.
If there are only phone numbers saved under
the contact, the contact is deleted from the
phone book and the address book.
If there are additional entries under the con-
tact, such as a navigable destination, only the
phone numbers are deleted. The contact is
retained in the address book with the remain-
ing entries.
To highlight a contact in the phone book:
X
turn the controller.
To select G: slide 9 the controller.
X
X
page 113).
Y
X
or
X
X
or
X
Always pay attention to traffic conditions.
Familiarize yourself with the address book
functions before beginning your journey.
You can use COMAND when the road and
traffic conditions permit. You could otherwise
become involved in an accident in which you
or others could be injured.
The address book displays all the contacts
from the various sources (mobile phone,
memory card, USB device, COMAND phone
book, navigation).
You can use the contacts to make telephone
calls, navigate and to write messages.
If a mobile phone is connected to COMAND
and automatic calling up is activated
(
are displayed in the address book. If you dis-
connect the mobile phone from COMAND,
these contacts are no longer displayed in the
address book.
When you import, save, edit or add contacts,
they will be saved in COMAND. These con-
tacts will remain there even when you con-
nect COMAND to a different mobile phone.
To select Delete Contacts Delete Contacts: turn and
press the controller.
A prompt appears asking whether the con-
tact should be deleted.
To select Yes: turn and press the controller. Yes
The phone number is deleted.
To select No No: turn and press the controller.
The process is canceled.
Closing the phone book
To select & from the character bar: turn
the controller and press to confirm.
Press the % button.
Address book
Introduction
page 121), the mobile phone's contacts
Y