Connecting The Host Computer; Connecting The Serial Communications Port - HP T750 User Manual

T750 INTL

Connecting the host computer

CAUTION: Use only the computer interface cable supplied with the UPS to connect the communications
port to the host computer.
Connect the UPS to a host computer using either the USB cable or the DB9 serial cable included with the
UPS. Install HP Power Manager software 4.0 or later on the host computer. See the HP website
(http://www.hp.com/go/rackandpower) to download the latest version of HP Power Manager.
NOTE: To install and configure the software, see the software user guide. The software user guide is
available for download from the HP website (http://www.hp.com/go/rackandpower).

Connecting the serial communications port

Output voltage Input voltage range
120 V* 108–127 V
220 V 198–233 V
230 V 207–243 V
230 V* 207–243 V
240 V 216–254 V
DIP switch 2 DIP switch 1
Down Down
Up Down
Up Up
Down Down
Down Up
Installation 12