HP T1500 xr Installation Instructions

hp ups T1500 xr/T2200
xr models extended
runtime module

installation instructions

Read Instructions Completely
Before Beginning Installation Procedures
Hewlett-Packard Company shall not be liable for technical or editorial errors or
omissions contained herein. The information in this document is provided "as is"
without warranty of any kind and is subject to change without notice. The warranties
for HP products are set forth in the express limited warranty statements
accompanying such products. Nothing herein should be construed as constituting an
additional warranty.
HP UPS T1500 XR / T2200 XR Models Extended Runtime Module Installation
Instructions
Second Edition (August 2002)
Part Number 215493-022
215493- 022
Overview
These instructions show how to install an extended runtime
module (ERM). The ERM can be connected directly to a
T1500 XR or T2200 XR model, or to another ERM. Up to two
ERM units can be connected. Depending on the load, one ERM
can extend the available UPS runtime by up to 15 minutes.

Important Safety Information

Before installing this product, read the Important Safety
Information document provided.
WARNING:
•
The installation of this product must be performed by
individuals who are knowledgeable about the procedures,
precautions, and hazards associated with AC and DC power
products.
•
There are no user-serviceable components inside.
Regulatory Compliance Information
All regulatory certifications for this product were obtained under
the agency series number EO3019B. The corresponding part model
number is 218969-B21.
Weight
WARNING: The ERM weighs 29 kg (64.5 lb) when fully
assembled. To prevent personal injury or damage to
the equipment:
29 kg
•
Observe local occupational health and safety
64.5 lb
requirements and guidelines for manual material
handling.
•
Obtain adequate assistance to lift and stabilize the
product during installation or removal.