Attaching the UPS front bezel
Connecting the host computer
CAUTION:
more than one will result in unexpected UPS behavior. If an option card is installed, the serial and
USB communications ports are automatically disabled.
Connect the UPS to a host computer using either the USB cable or the DB9 serial cable included with the UPS.
Install HP Power Protector on the host computer. See the HP website
(http://www.hp.com/go/rackandpower) to download the latest version of HP Power Protector.
NOTE:
guide is available for download from the HP website (http://www.hp.com/go/rackandpower).
Only one communications port can be connected to the host computer. Connecting
To install and configure the software, see the software user guide. The software user
Installation 20