Selecting The Ups Voltage Configuration; Connecting The Host Computer - HP R1500 - UPS XR User Manual

Selecting the UPS voltage configuration

Using a small tool, position the DIP switches according to the desired voltage configuration.
NOTE:
R1500 G2
JPN/TWN
R1500 G2 NA
R1500 G2 INTL

Connecting the host computer

CAUTION:
Connecting more than one will result in unexpected UPS behavior. If an option card is
installed, the serial and USB communications ports are automatically disabled.
Connect the UPS to a host computer using either the USB cable or the DB9 serial cable included with the
UPS. Install HP Power Manager software 4.0 or later on the host computer. See the HP website
(http://www.hp.com/go/rackandpower) to download the latest version of HP Power Manager.
NOTE:
guide is available for download from the HP website
(http://www.hp.com/go/rackandpower).
An asterisk (*) indicates the default setting.
Output voltage Input voltage range
100 V* 90–106 V
110 V 99–116 V
110 V 99–116 V
120 V* 108–127 V
220 V 198–233 V
230 V* 207–243 V
240 V 216–254 V
Only one communications port can be connected to the host computer.
To install and configure the software, see the software user guide. The software user
DIP switch 1 DIP switch 2
Down Down
Down Up
Down Up
Up N/A
Down Up
Up N/A
Down Down
Installation 19