Damping Force Adjustment
The rebound and compression damping
force can be individually adjusted by turning
the respective adjusters. The rebound
damping force adjuster 2 is located at the
top of the front suspension. The compres-
sion damping force adjuster 3 is located at
the bottom of the front suspension.
To adjust the damping force, set the adjuster
to the standard setting first and then adjust
the adjuster to the desired position.
To set the rebound damping force adjuster
to the standard position, turn the adjuster
clockwise until it stops and then turn it coun-
terclockwise 9 clicks.
Turn the adjuster clockwise from the stan-
dard position to stiffen the damping force.
Turn the adjuster counterclockwise to soften
the damping force. The damping force
should be adjusted gradually, 1 click at a
time, to fine-tune the suspension.
2-54