Running Time
Running timer counts total time when the
running time switch and ignition switch are
turned on. The running time counts from
00:00 to 99:59 and it stops at 99:59.
To turn on/off running time:
1. Push SET switch to turn on the running
timer.
mark will start blinking.
2. Push the SET switch to stop counting.
mark goes off.
3. Push the SET switch to restart counting.
mark starts blinking.
To reset the running time:
1. Push the SET switch for more than 2
seconds. Running time displays 00:00
when the running time is reset.
NOTE: Switching running time will switch
average speed at the same time.
2-25