PROCEDURE DURING STORAGE
Once a month, recharge the battery with a
specified charging rate (Ampere). Standard
charging rate is 1.2A × 5 to 10 hours.
PROCEDURE FOR RETURNING TO
SERVICE
•
Clean the entire motorcycle.
•
Reinstall the battery.
NOTE: Be sure to connect the positive ter-
minal first, then connect the negative termi-
nal.
•
Remove the spark plugs. Turn the
engine a few times by putting the trans-
mission in top gear and turning the rear
wheel. Reinstall the spark plugs.
•
Drain the engine oil thoroughly. Replace
the oil filter with a new one and pour
fresh oil as outlined in this manual.
•
Adjust the pressure of tires as described
in the TIRES section.
•
Lubricate all places as instructed in this
manual.
•
Do the INSPECTION BEFORE RIDING
as listed in this manual.
8-7