Feature User Guide
• Emergency Mode — all Call-out alerts are ignored.
7.1.3 Call-Out Service Phases
In the Call-Out mode there are following phases:
• Alerting phase — receives a Call-Out message. The alarm tone indicates the message. Text is displayed
and you have following options to use: Accept, Reject or MENU. If you accept the alert, no other service
from this point can interrupt.
You can stop the alert tone by pressing PTT or any of the soft keys.
• Information phase — you are still in the Call-Out mode and you can receive more detail information about
the incident that occurred through subsequent text or the voice message. You can query for more information
using voice group call or Call-Out text function which enables you to send a text message. You can always
respond and send back the text or the voice message using voice group call.
7.2 MS-ISDN
This feature adds to the radio ISDN number. You can choose between MS-ISDN and ISSI to address the call, send the
message or pre-defined templates. It works for both simplex and duplex calls, based on the assigned ISDN number.
7.3 DTMF Overdial
This feature allows you to communicate with an automated answering device (for example, the voice mail or
answering machine) during an on-going private, phone or PABX call.
While in an on-going private, phone or PABX call, press the DTMF keys (0-9, *, #). When pressed, the DTMF key
sounds a tone and the entered digit is displayed on the screen.
7.4 Dialing through Soft Numeric Keypad
Prerequisites: Direct Private Number Dialing is assigned to a right NAVIGATION key.
Procedure Steps
1
From the home screen, press and hold right NAVIGATION key.
Step result: Your radio displays dialing number prompt.
7-2
-