When the group call ends, your radio switches to the original talkgroup after the predefined time.
3
2.16 Activating Talkgroup Scanning
When and where to use: If you want to monitor any TMO Group Call in the defined talkgroup list.
Procedure Steps
1
From the home screen, press MENU key.
2
Select More . . . → Group Setup → Scan → Scanning.
3
Select Select List and then a list name.
Step result: Your radio displays list name Selected.
Select Scanning → On.
4
Result: Your radio is scanning on the predefined scan list.
2.17 Dialing through Soft Numeric Keypad
Prerequisites: Direct Private Number Dialing is assigned to a right NAVIGATION key.
Procedure Steps
From the home screen, press and hold right NAVIGATION key.
1
Step result: Your radio displays dialing number prompt.
2
Rotate the ROTARY KNOB or press up/down NAVIGATION key to choose the number, then press the knob
or right NAVIGATION key to go to the next digit.
3
Press PTT.
2.18 Writing Text
Every time that you see text entry screen, refer to this section.
-
• You can enter # at the end when the Speed Dialing feature is enabled.
• The + sign you can enter only when you are editing the first position. Both signs are available
after digit 9.
2.16 Activating Talkgroup Scanning
2-17