Terminal Disable/Enable; Terminal Permanent Disable; High/Low Audio Toggle - Motorola MTP830 S Feature User Manual

Feature User Guide
Table 2-10 One-Touch Button Features (cont'd.)
Feature
Initiate Call-Out Fallback Alert
Previous Talkgroup
Display OPTA
BSI Encryption
Scroll Audio Profiles
Direct Private Number Dialing
Toggle RF Power Class
GPS Status Message
Connect/Disconnect RSM Earpiece
Repeater Mode
Default Settings
Speaker Enable / Disable Per Call
Timed Talkgroup Change
All the features can be assigned on the option buttons for RSM accessories.

2.22 Terminal Disable/Enable

Your radio is provided with a feature that allows your service provider to disable it temporarily in case it is stolen.
When your radio is disabled or is powered up in disabled state, it looks and acts like it is turned off.
If your radio is found, your service provider can enable it again over the air. After your radio is enabled, you
may resume normal operation.

2.23 Terminal Permanent Disable

Your radio is provided with a feature that allows your service provider to disable it permanently in case it is stolen
or lost. When your radio is disabled permanently, it becomes inoperable. After a Permanent Disable your service
provider cannot enable your radio. It is recommended to Permanent Disable your radio only when you do not expect
to recover it. If it is recovered then a Permanent Disable radio can be reactivated by returning it to Motorola

2.24 High/Low Audio Toggle

The user is able to switch from the external earpiece to the main speaker using SPEAKER CONTROL key and is
not required to disconnect the external earpiece or PHF.
2-20
Description
Sends Fallback Alert.
Switches the radio to the previously used talkgroup.
Displays Operative Tactical Address.
Toggles on/off encryption.
Scrolls through all available audio profiles.
Initiates private number dialing editor.
Toggles the RF Power High/Normal.
Sends your GPS location in a message to a dedicated address.
Connects/Disconnects RSM earpiece.
Turns on/off the Repeater Mode.
Resets all the radio settings to the default.
Enables speaker during the call.
Initiates the Timed Talkgroup Change feature. While in the
predefined talkgroup, it can be assigned to the second press function.
-