Front Of Zerowire - Interlogix ZeroWire Installation Manual

Front of ZeroWire

Key
Colour Description
System is in alarm. Enter your
Red
PIN code then ENTER to turn off
the alarm. Press STATUS key for
ALARM
more info.
System is disarmed if Away is
Not lit
also not lit. Press the STAY key
to arm in Stay mode.
System is armed in the "STAY"
Yellow
STAY
mode.
System is normal.
Green
Non-urgent system conditions
Yellow
present. Press the STATUS key
to hear system conditions.
Urgent system conditions
Red
present.
(steady)
STATUS
Touch the STATUS key to hear system
messages. If you are unable to fix the issue,
contact your service provider for help.
Not lit
Red
AWAY
Not lit
READY
ZeroWire Installation Manual
System is disarmed if Stay is also
not lit. Press the AWAY key to arm
in Away mode.
System is armed in the "AWAY"
mode.
System cannot be armed, press
STATUS key for more info.
Key
Colour Description
Green
(steady)
READY
Green
(flashing)
Press the BYPASS key if you wish to isolate
(ignore) a sensor. Bypassed sensors will not
be active when you arm the system in Stay or
BYPASS
Away modes.
Press the CHIME key to select which sensors
will make a doorbell sound on the ZeroWire
when they are tripped.
CHIME
Press the HISTORY key to listen for alarm
and event history.
HISTORY
Feature must be enabled by your security
provider. Check what response will be
FIRE
provided. Hold down the key to send a
MEDICAL
message to a central monitoring centre.
POLICE
Enter your PIN code then ENTER to turn off
a SOS alarm.
All sensors are ready and the
system can be armed in Away or
Stay mode.
Sensors are currently unsealed but
system is force-armable. If these
sensors are not sealed by the end
of the exit time the system will go
into alarm.
3