Phone Status: Audio/Visual Feedback; Led Feedback; Tone Feedback - Mitel 5302 User Manual

5302 IP Phone User Guide

Phone Status: Audio/Visual Feedback

The status of the 5302 phone is provided by the LEDs and tones played either through the handset or
speaker.

LED Feedback:.

LED
Message /
Ringing
Line 1
Line 2

Tone Feedback

Tone Name
Error tone
Busy tone
Re-Order tone
Ring-back tone
Ring tone
Paging tone
This Manual: http://www.manuallib.com/file/2618403
Off On (Solid)
No voice Not Applicable
messages in
your mailbox,
and no
incoming call.
Line 1 is idle. There is an active call
on Line 1 or Line 1
has been seized to
place an outgoing call.
Line 2 is idle. There is an active call
on Line 2 or Line 2
has been seized to
place an outgoing call.
Is heard when...
you press a programmable key that has not been configured by your System
Administrator
a called party is busy.
an incorrect number has been dialed..
a called party is ringing.
there is an incoming call
a page is received.
TM
, ® Trademark of Mitel Networks Corporation.
© Copyright 2007, Mitel Networks Corporation.
Blinking slowly
There is an incoming
call. Ringing indication
takes precedence
over voice message
indication.
There is an incoming
call on Line 1.
There is an incoming
call on Line 2.
All rights reserved.
9
Blinking quickly
There is a new
message in your
voicemail box.
There is a held call on
Line 1.
There is a held call on
Line 2.