Yamaha YSP-300 Owner's Manual page 91

You can select the type of audio input signals of the selected input source according to your preference or the conditions
of the input source. This function is available for TV/STB, DVD, AUXI, and AUX2.
_%,._
We recommend setting the input mode to AUTOill most cases.
3 Press INPUTMODE repeatedly to toggle
between input modes.
U.S.A. and Canada models)
1 Set the operation mode selector to YSP.
iNPUTIVIODE
t) i..i) qLFi_ _ Fi....'5T"i? _:_i°fi_
t;:" i;" f5 fi....'5f.,.-? i;" f5
When DVD is selected
"."'.5"'i".,'i:" -:Tf"L,':TL.i_'ii;"
as the input source
When TV or STB is selected
as the input source
r,-.,,:
M.,._' , i % ii_
_'J_::i u .............., ,:-, [.,,,,_ -_ ,:?U>_';:?,:.U,,!:
_'i..'_'i _'_"" "_"i'.2 !...'i"_ 'TC's ..o,
When AUXt is selected When AUX2 is selected
as the input source as the input source
ANALOG is not available as the input mode of DVD and
AUX2.
Press one of the input selector buttons to
select the desired input source.
";2. ";.>
• AUTO
Automatically selects audio input signals in the following
priority order:
1) HDMI
2) Digital
3) Analog
_%,._
Use this input mode in most cases.
• DTS
Selects only digital signals encoded in DTS.
Compared to AUTO, this input mode provides greater
stability while playing back CDs or LDs encoded in DTS.
• ANALOG
Selects only analog signals.
Even when both digital and analog signals are input
simultaneously, only analog signals are selected.
You can adjust the default input mode to be selected when the
power of this unit is turned on by adjusting INPUT MODE in
INPUT MENU (see page 80).
I
87
En