Yamaha YSP-300 Owner's Manual page 89

5 Press TEST when you have completed all
your adjustments.
TEST
• All channel levels cannot be adjusted when the 2-channel or 5-
channel stereo playback (see page 60), My Beam (see page 61 ),
or My Surround (see page 55) is selected as the beam mode.
• "FRONT L/R" cannot be adjusted when Stereo plus 3 Beam is
selected as the beam mode (see page 55).
• "FRONT L/R" are automatically adjusted depending on the
settings of the other channels when Stereo plus 3 Beam or
stereo playback is selected as the beam mode (see pages 55 and
60).
--'4'--
If
the level of a particular channel cannot be adjusted, "- -dB"
appears in the front panel display.
You can also manually adjust the channel levels while
playing back an input source such as a DVD.
2
Set the operation mode selector to YSP.
Press CH LEVEL repeatedly (or press
CH LEVEL and _ / _) to select the channel
you want to adjust.
The front panel display changes as follows.
CH LEVEL
CH LEVEL
or
--* FROf.77 L. .".,t,, '.::i:::,,:iB
,.... ,...::. u -,:. ,...::. ,...::, ..... .2,,.Sd B
l,w i,% ,,% i I ,,i.. I,H . _ ,,% 11,%
t
t
"-* .5" i '/FR .......... d i:.::;'
(U.S.A. and Canada models)
"SWFR" is available only when a subwoofer is connected to
this unit and SWFR is selected for BASS OUT in SOUND
MENU (see page 78).
85 En