Yamaha YSP-300 Owner's Manual page 123

• Preset Search mode •
Prior to selecting a preset channel in the Preset Search
mode, you must preset the XM channels. For details, see 1
"Presetting the XM
TM
Satellite Radio channels" on page 9.
1
Press SEARCH repeatedly to select
"PRESET SEARCH".
SEARCH
XM
i"' b':' i " "'=i" i "'=i" M b':'i. i". .=
2
Press CAT/A-Eo (<_/ )) repeatedly to change
the preset channel group (A to E).
CAT/ i
Press ENTRY--. (_ / v) repeatedly to
change the preset channel number (1 to 8).
ENTRY€
You can also use the numeric buttons to directly input the preset
channel number.
Direct Number Access mode
Press SEARCH repeatedly to select either
"ALL CH SEARCH" or "CAT SEARCH".
SEARCH
XM
=,,,: ._ =,,,, ._! =,,,, r,,, =,,,= r,,= =,,,, ._!
............ •"..,. r":," 2) i2.J...i r":.."..,, r":"
or
XM
i . M i "'=i" M i'.':' i . i". . =
2 Press the numeric buttons (0 to 9) to enter
the desired three-digit XM channel number.
For example, to enter the number 123, press the
numeric buttons 1,2, and 3.
5BEAM ST+3BEAM 3BEAM
The front panel display changes as follows:
XM
':;;:':iP'i .:: ......... .L
XM
XM
......... : ,'% ,,,;,
":,?"i'i ..:" .i.,:'.'..5
• To enter a one- or two-digit number, press the corresponding
number button(s), and press ENTER to confirm the number. [f
you do not press ENTER, this unit automatically confirms the
entered number after a few seconds.
• If you press a button other than the numeric buttons and
ENTER during this operation, the Direct Number Access mode
is canceled.
SEn