Yamaha YSP-300 Owner's Manual page 14

This section describes the functions of the remote control
used to control this unit. Some buttons marked with an
asterisk (*) share the common functions between the YSP
and TV/AV operation modes (@).
_%,_
You can also control other components using the remote control
once you set the appropriate remote control codes. See
"Controlling other components" on page 97 for details.
Infrared window
Outputs infrared control signals. Aim this window at the
component you want to operate.
@ STANDBY/ON
Sets this system to the standby mode (see page 31 ).
@ Transmission indicator
Lights up when infrared control signals are being output.
@ Input selector buttons
Use to select an input source (DVD, AUK l+ AUK2+
AUX3, STB, TV, or FM).
@ VOk MODE
Turns on or off the volume modes (see page 67).
@ AUTO SETUP
Enters the AUTO SETUP menu (see page 35).
CINEMA DSP program buttons
Select the CINEMA DSP programs (see page 63).
@ ENHANCER
Turns on or off the Music Enhancer (see page 66).
Cursor buttons A / _ / _ / _, ENTER
Select and adjust SET MENU items.
DISPLAY
Displays information on the selected input signal.
@ VOLUME +/-
Increases or decreases the volume level of this unit (see
page 47).
MUTE
Mutes the sound. Press again to restore the audio output to
the previous volume level (see page 47).
@ TV INPUT
Toggles between the input sources on the TV (see
page 97).
@ CH LEVEL
Adjusts the volume level of each channel (see page 85).
TEST
Outputs a test tone when adjusting the output level of each
channel (see page 84).
10
En