Yamaha YSP-300 Owner's Manual page 52

There are two tuning methods: automatic and manual. Automatic tuning is effective when the radio signal is strong and
there is no interference. If the radio signal is weak, tune into the FM station manually. You can also use the automatic and
manual preset tuning features to store up to 40 stations in total (AI to ES: 5 preset station groups with 8 preset station
numbers each).
• This section exceptionally uses the remote control for Europe, Australia, Asia, and Korea models.
• When the operation mode selector is set to TV/AV,you call operate all FM functions. When the operation mode selector is set to YSP,
you call only operate the functions described ill "Selecting a preset station" (see page 52).
Orient the connected FM antenna for the best reception.
• Remote control functions
Set the operation mode selector (@) to TV/AV before
tuning or preset tuning.
(Europe, Australia, Asia, and
Korea models)
@ FM
Selects FM as the input source. This unit is tuned into the
last selected FM station.
_%,._
U.S.A. and Canada models use FM/XM.
@ PRESET/TUNE
Switches between the preset search mode and the
frequency search mode (see page 51 ).
@ Numeric buttons
Use numbers 1 through 8 to select the preset station
numbers (see page 52).
@ ENTRY* (A/_)
• Selects the preset station numbers (1 to 8) when the
colon (:) is displayed in the front panel display
(see page 52).
• Selects the tuning frequency when the colon (:) is not
displayed in the front panel display (see page 49).
A-E ,, (<_/_>)
Selects the preset station groups (A to E) (see page 51 ).
_%,._
U.S.A. and Canada models use CAT/A-E _.
@ MEMORY
• Stores a preset station in the memory (see page 51 ).
• Hold down this button for more than three seconds to
start automatic preset tuning (see page 50).
SEARCH
Switches between automatic tuning (the AUTO indicator
is turned on) and manual tuning (the AUTO indicator is
turned off) (see page 49).
@ Operation mode selector
Selects the operation mode of this unit.
48
En