Yamaha YSP-300 Owner's Manual page 86

SUPPORT AUDIO (Support audio)
Use to select whether to play back HDMI audio signals on
this unit or on another HDMI component connected to the
HDMI OUT jack of this unit.
Choices: YsP-aO00, OTHER
i11"_4 ] ..' }]i_..] :; iii;e ].e,:,':.i:.
{IEHiET;;:] : ; F;i:e'i..r..Ir'l°t
HDMI CONTROL (HDMI control)
Use this function to link this unit and an HDMI control-
compatible TV via HDMI. You can turn on or oft" the
power, select the input mode, and adjust the volume level
of this unit using the remote control supplied with your
HDMI control-compatible TV. For details, see "Using the
HDMI control feature" on page 71.
Choices: OFF, ON
C,;!'ii,,_i'ii LLii',i !i(LiL,
I])F:F i,_. I ])f'4
i:: " 47y i::i_..:] :; 5e ].<i_ c.i:.
[:iiSi:i'4 f El;I::} : ; F;i:e i :..c._l-n
• This setting is effective when HDM[ CONTROL is set to OFF
(see right).
• When HDM[ CONTROL is set to ON, this setting is ineffective.
This unit follows the settings of the HDM[ control-compatible
TV.
• The HDM[ video signals input at one of the HDM[ IN jacks of
this unit are always output at the HDM[ OUT jack of this unit.
VIDEO INFO (Video information)
Use to display the video information of the current input
signal.
Choices: HDMI RES., HDMI ERROR
:i:i,,iF0
+ Hi]:'ig:[ F:F :':::, . ...... i!3;3_ii_F:'
Hi::,iq : i: :PF': I';', .....................
if: EFii Et:;i: i}:: t:;i:_i, i:.r,.i !"!n
Select HDMI RES. to display the resolution of the
HDMI input/output signals.
Select HDMI ERROR to display the error message for
HDMI sources or devices connected
(see page 104 for details).
• Select ON to enable the HDMI control. The signals
input at the HDMI IN jacks are output at the HDMI
OUT jack when this unit is in the standby mode.
• Select OFF to disable the HDMI control. The signals
input at the HDMI IN jacks are not output at the HDMI
OUT jack when this unit is in the standby mode.
• XM ANTENNA LEVEL (XM antenna level)
(U.S.A. and Canada models only)
Use to display the current reception level of the XM
Satellite Radio signals. For the best reception, orient the
connected XM Mini-Tuner Dock to obtain a value of 60%
or more.
Display status: NONE, 0 to 100%
i]EH f El;;:]:; F;i:e'i..r..ir'.n
"NONE" is displayed if the XM Mini-Tuner Dock is not
connected to this unit. In this case, check the antenna connections
(see page 5 in the Reference Guide).
82
En