External Connections; Midi In; Midi Mod; Midi Seq - Johannus Opus 5 User Manual

External connections

The following external conceptions are located left under the console:

MIDI IN

To receive MIDI-codes from the other instruments.

MIDI MOD.

Programmable MIDI-output. This MIDI-output is programmable for optimal use of e.g. an Sound
expander module.

MIDI SEQ.

Non-programmable MIDI-output. This MIDI-output is sending a constant data-output with all (for
e.g. a sequencer) required information (data dump).
When using our personal voicing software INTONAT you should use the MIDI SEQ output to
send data to the computer. (In fact, a data dump too).

AUX IN

This input can be used to amplify the sound of an external device through the speakers of the
organ. E.g., it is possible to play the sound of an expander module that is controlled by the
organ's MIDI out through the organ's speakers.
The volume of the device that is connected to the AUX IN cannot be adjusted by the expression
pedals or the VOLUME control (except external devices that are controlled by the organ's MIDI
OUT).

AUX OUT

This output is meant to connect an external stereo amplifier.
User's Manual
JOHANNUS JOHANNUS
14
Opus 5, 10, 20 and 30 AGO