Rear Side - Epson TM-C7500 Series Technical Reference Manual

Rear Side

USB Connector
Ethernet Connector
Wire Saddle
AC Inlet
Air Vent
Name
USB Connector
Ethernet Connector
Wire Saddle
AC Inlet
Air Vent
Dip Switch Cover mounting
screw
Dip Switch
Dip Switch Cover
When setting the Power button operation to "Power switch disabled (Reset operation)", make
sure the printer is not operating when turning the power OFF.
For connecting a USB cable.
For connecting a LAN cable.
Pass the USB cable through this saddle to prevent disconnection of the
USB cable.
For connecting a power cable.
Exhausts heat generated in the product to prevent an internal
temperature rise. Allow a clearance of 10 cm {3.94"} or more from the air
vent to ensure ventilation when installing the product.
Remove the screw to open the Dip Switch Cover.
Used when changing the function of the Power button.
When operating the Dip Switch, remove the Dip Switch Cover Mounting
Screw and open the cover.
Chapter 1
Dip Switch Cover
Dip Switch
Dip Switch Cover mounting screw
Description
Product Overview
1
19