Epson TM-C7500 Series Technical Reference Manual page 113

Specifying the barcode data
Specify the barcode data by referring to the following descriptions.
About the composite symbol:
The switch between CC-A to CC-B can be automatically performed, but the customer needs to select
explicitly for CC-C.
(In case of GS1-128, the type of composite component can be selected from "None", "CC-A/CC-B" or
"CC-C".)
Composite Component Type
CC-A
CC-B
CC-C
About the HRI character:
When the total width of the HRI character is larger than that of the barcode, the HRI character
width is set as the barcode width.
UPC-A
• Specify data in 11 digits. The check digit is automatically added.
UPC-E
• Specify data in 10 digits. 5 digits are a manufacturer code and the rest 5 digits are an item code.
JAN13(EAN)
• Specify data in 12 digits. The check digit is automatically added.
JAN8(EAN)
• Specify data in 7 digits. The check digit is automatically added.
Code39
• When both or either one of start/stop code ('*') is not specified, it is automatically added.
ITF
• When data of odd digit number is specified, "0" is automatically added to the head.
Codabar(NW7)
• Do not include the start code and stop code into data. The start code and stop code specified in the
driver screen are added.
Encodable Digit Number
1 ~ 56 digits
1 ~ 338 digits
1 ~ 2361 digits
Chapter 3 Handling
113
3