Epson TM-C7500 Series Technical Reference Manual page 176

Media type
Media source
Paper width
Black mark width
Black mark length
Black mark position
Gaps between black marks
Paper thickness
Gaps of perforated line
Number of folds
Form of perforated line
 Do not use the paper with a hole or cutout.
 Black marks must position away at least 0.5 mm {0.02"} from the perforated line.
 Autocutting position must be performed 0.5 mm to 1 mm {0.02 to 0.039"} behind the perfo-
 Make sure to keep the same position of the black marks to the perforated lines (position that
 The perforated lines on both sides of the paper edge must be left uncut.
176
Plain / Matte
Fanfold paper
50 to 112 mm {1.97 to 4.41"}
28 mm {1.10"} or more from paper edge
5 mm {0.20"} or more
Right edge of back of paper, when feed edge is at top
50 to 304.8 mm {1.97 to 12"}
0.128 to 0.142 mm {0.005 to 0.006"} (reference values)
203.2 to 304.8 mm {8 to 12"}
750 or less
1 mm {0.039"} uncut, 5 mm {0.20"} cut
rated line.
can be detected by black mark sensor) when inserting the paper from either side in order to
use the paper inserting from reverse direction.
Perforated line
Length of the
uncut portion
1 mm { }
0.04"
Length of the portion
1 mm { }
0.04"