Epson TM-C7500 Setup Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Printer
  5. TM-C7500 Series
  6. Setup manual
Epson TM-C7500 Setup Manual

Epson TM-C7500 Setup Manual

Hide thumbs Also See for TM-C7500:
Table of Contents

Advertisement

Quick Links

Setup Guide
Before use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Setting the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Consumable Products and Options . . . . . . . . . . . . . . . . . 30
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
M00079300EN

Advertisement

Table of Contents
loading

Related Manuals for Epson TM-C7500

Summary of Contents for Epson TM-C7500

  • Page 1: Table Of Contents

    Setup Guide Before use......... . . 2 Part Names and Functions .

  • Page 2: Before Use

    English Before use This manual describes the setup operations for this product from installation to the print standby status. Please read this manual carefully before using this product. For details about the functions and operation procedure of this product and software, maintenance information, and troubleshooting, refer to Technical Reference Guide.

  • Page 3: Cautions On Handling

    Do not use a damaged power cable. Doing so may cause electric shock or fire. Contact a Seiko Epson service center for advice if the power cable is damaged. Observe the following points so as not to damage the power cable: •...
  • Page 4 English ❏ Do not connect cables in ways other than those mentioned in this manual. Doing so may cause fire. It may also damage other devices. "Connecting the Power Cable" on page 12 "Connecting the Interface Cable" on page 13 ❏...

  • Page 5: Caution Label

    English ❏ There may be some ink around the ink supply port on the removed ink cartridge. Take care so that it does not stain the desk or other surface. ❏ Do not remove the ink cartridge, except when you replace it. ❏...

  • Page 6: Part Names And Functions

    English Part Names and Functions Front Side Ink Cartridge Cover Open this cover to install/replace the ink cartridge. "Installing the Ink Cartridge" on page 13 Front Cover Open this cover to remove jammed paper. (U "Paper is jammed" on page 25 Rewinder Connection Cover Open this cover to install the rewinder (option).

  • Page 7: Operation Panel

    English Operation Panel Status Pause Paper Back Feed Pause Menu Feed Cancel Displays the menus and messages. Pause Button Press this button during printing to pause printing after one page of data is printed. Press this button while the printer is paused (while the Pause LED is on) to resume printer operation and have the printer return to the print standby status.
  • Page 8 English Cut Button Cuts the paper. Feed Button Press this button for less than three seconds to feed one page of paper. Press this button for three seconds or more to feed the paper continuously. Back Feed Button Press this button only when replacing paper. After cutting the printed paper using the Cut button, hold down the Back Feed button to feed the paper backward so that you can pull out the paper.

  • Page 9: Rear Side

    English Rear Side USB Connector For connecting a USB cable. Ethernet Connector For connecting a LAN cable. AC Inlet For connecting a power cable. Wire Saddle Pass the USB cable through this saddle to prevent disconnection of the USB cable. Air Vent Exhausts heat generated in the product to prevent an internal temperature rise.

  • Page 10: Basic Operation

    English Basic Operation Turning On/Off This section describes how to turn on/off the product. Turning On Press (Power) button. (Power) LED lights up and the power turns on. Turning Off Hold down (Power) button for one second or more. (Power) LED turns off and the power turns off.

  • Page 11: Setup

    English Setup Removing the Protective Tape Protective tape is applied for protection against shock during transportation. Remove the tape before installation. Notes: The protective tape and packaging box will be required for future transportation. Keep them in a safe place. Installing the Printer Secure sufficient space in a location appropriate for installation.

  • Page 12: Connecting The Power Cable

    English ❏ In a location where a dedicated power outlet is available. ❏ In a location where you can set and remove paper without difficulty. ❏ In a location with sufficient space around the product to allow for installation of accessories, replacement of consumable products, and daily cleaning.

  • Page 13: Connecting The Interface Cable

    English Connecting the Interface Cable Connect the interface cable to be used to the connector on the rear side of the printer. "Rear Side" on page 9 CAUTION: When using a USB cable, pass the cable through the wire saddle to prevent accidental disconnection. Wire Saddle Installing the Ink Cartridge Install the ink cartridge by following the steps below.
  • Page 14 English 3. Shake the ink cartridge package four or five times before opening it. 4. Push all the ink cartridges of the four colors gently into the product until they click in place. Check the color of the ink cartridge label and of the ink cartridge holder label, and set the cartridges to each matching color.
  • Page 15 English CAUTION: Never open any cover on the product or turn off the product during ink charging (while the (Power) LED is flashing). Doing so during ink charging will consume a large amount of ink, which may require replacement of the ink cartridge before completion of charging. 6.
  • Page 16 English 3. Open the roll paper cover. 4. Pull out the roll paper flange while holding the release lever of the roll paper flange between your fingers. Release Lever Roll Paper Flange 5. Attach the roll paper to the spindle, and push the core of the roll paper as far as possible so that it is securely fit it into place.
  • Page 17 English 6. Pull out the end of roll paper. 7. Attach the roll paper flange to the spindle while holding the release lever of the roll paper flange between your fingers. Push the flange to the bottom to align it with the roll paper width. Release Lever Roll Paper Flange...
  • Page 18 English 8. Open the paper hold inside the paper set cover. Paper Hold 9. Insert the paper along the paper guide (a). Align the end of the paper with mark. Mark Paper Guide (a)
  • Page 19 English 10. Move the paper guide (b) to align it with the paper width while pushing the paper guide (b) lever. Paper may become jammed if the position of the paper guide (b) is not aligned with the paper width. Adjust the paper guide (b) in accordance with the paper width.
  • Page 20 English 12. Close the paper hold. Paper Hold 13. If the paper is loose, turn the roll paper flange in the direction of the arrow to tighten the paper. 14. Close the roll paper cover.
  • Page 21 English 15. Close the paper set cover. 16. Press the Pause button Test Printing (Nozzle Check Printing) You can check whether the printer is operating normally by printing the nozzle check pattern. Perform nozzle check printing by following the steps below. You can use nozzle check to check whether the nozzle is clogged from the printed pattern.

  • Page 22: Setting The Ip Address

    English Setting the IP Address Set the IP address of the product by following the steps below. 1. Make sure that the printer is powered on. (U "Turning On" on page 10 Press (Menu) button to display the menu. 3. Select [I/F SETUP] and press the OK button. 4.

  • Page 23: Setting The Printer

    English Setting the Printer You can specify various settings for the printer from the menu screen. This section describes the procedure for specifying basic settings. Time Setting Set the current date and time by following the steps below. 1. Make sure that the printer is powered on. (U "Turning On"...

  • Page 24: Language Setting

    English Language Setting Set the language used for the messages displayed on the LCD by following the steps below. 1. Make sure that the printer is powered on. (U "Turning On" on page 10 Press the (Menu) button to display the menu. 3.

  • Page 25: Troubleshooting

    English Troubleshooting Power is not turned on/LED is not turned on Check that the power cable is properly connected. (U "Connecting the Power Cable" on page 12 Status/Pause LED is on/flashing in amber ❏ Check that all the covers are securely closed. (U "Front Side"...
  • Page 26 English 3. Pull the front cover open lever at the paper feed slot. Front Cover Open Lever 4. Open the front cover.
  • Page 27 English 5. Cut the jammed paper and remove it. WARNING: Do not touch the metal wheels. Doing so may cause injury. 6. Pull out the paper from the paper feed slot.
  • Page 28 English 7. Close the front cover. 8. Set the paper again. (U "Setting the Roll Paper" on page 15...

  • Page 29: Specification

    Overall dimensions (W × D × H) 392 × 598 × 395 mm {15.43 × 23.54 × 15.55”} (The protrusion excluded) Mass Approximately 37.0 kg {81.57 lb} (Not including the ink cartridge, maintenance box and roll paper) *: According to Epson's operating conditions...

  • Page 30: Consumable Products And Options

    Use of non-genuine Epson maintenance boxes can prevent the printer from optimal operation. Repairs for any damage or breakdown of this product due to the use of non-genuine Epson products will not be free of charge even if the warranty period is still valid. Epson cannot guarantee the quality and reliability of non-...
  • Page 31 English Rewinder The rewinder is a device used to rewind the printed paper into a roll form. The rewinder available for this product is: Model: TU-RC7508 For details about how to install the rewinder, refer to the manual supplied with the rewinder.

  • Page 32: Appendix

    (4) Neither is any liability assumed for damages resulting from the use of the information contained herein. (5) Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and...
  • Page 33 Trademarks EPSON is a registered trademark of Seiko Epson Corporation. Exceed Your Vision is a registered trademark or trademark of Seiko Epson Corporation. All other trademarks are the property of their respective owners and used for identification purpose only. Product information is subject to change without due notice.

This manual is also suitable for:

Tm-c7500g

Table of Contents