Epson TM-C7500 Series Technical Reference Manual page 109

• Hexadecimal Entry Mode:
• Module:
• Bar Height:
• HRI Character Position:
The printing position is limited for some types.
• HRI Font:
• Element Ratio:
• Check digit:
• Auto Convert to Minimize Entire Symbol Width::
• Start character:
• End character:
2
Click [Add].
The selected barcode font is saved and the font name is added to the font list.
 The barcode font can be registered up to 30.
 The barcode font setting can be overwritten by clicking [Save] after selecting the font
name from the font list and changing the setting.
 The barcode font setting can be deleted by clicking [Delete] after selecting the font name
from the font list.
Turn on the check box when the data for barcode is specified on
Hexadecimal Entry Mode.
Sets the thin element width in dots.
(For details, see "Recommended value of the module" on page
Sets the element height with dots. Specified dots indicate the actual
print size.
Select the position of the HRI characters. Select [Do Not Print] when not
printing.
Select the HRI character font size.
Sets the thick element width by the ratio to the thin element width.
The recommended minimum element ratio is 2.5.
Values or marks appended to prevent sequential number errors or
fabrication.
Selectable when CODE128 is specified. This function minimizes the
number of symbol characters required to express the given data string.
Sets a start character.
Sets an end character.
Chapter 3 Handling
110.)
109
3