Configuring A Lifetime For Rsvp Authentication In Global Configuration Mode - Cisco CRS Configuration Manual

Implementing RSVP for MPLS-TE and MPLS O-UNI
RSVP Authentication Global Configuration Mode: Example, on page 150

Configuring a Lifetime for RSVP Authentication in Global Configuration Mode

Perform this task to configure a lifetime value for RSVP authentication in global configuration mode.
SUMMARY STEPS
1. configure
2. rsvp authentication
3. life-time seconds
4. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1 configure
Example:
RP/0/RP0/CPU0:router# configure
Step 2
rsvp authentication
Example:
RP/0/RP0/CPU0:router(config)# rsvp
authentication
RP/0/RP0/CPU0:router(config-rsvp-auth)#
Step 3 life-time seconds
Example:
RP/0/RP0/CPU0:router(config-rsvp-auth)#
life-time 2000
Step 4
Use the commit or end command.
Configuring Global Configuration Mode RSVP Authentication
Purpose
Enters global configuration mode.
Enters RSVP authentication configuration mode.
Controls how long RSVP maintains security associations with other
trusted RSVP neighbors.
seconds
Length of time (in seconds) that RSVP maintains idle security
associations with other trusted RSVP neighbors. Range is from
30 to 86400. The default value is 1800.
commit—Saves the configuration changes and remains within the
configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the configuration
session.
• No—Exits the configuration session without committing the
configuration changes.
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
135