Redistributing Mpls Ldp Routes Into Bgp - Cisco CRS Configuration Manual

Implementing MPLS Label Distribution Protocol
Command or Action
Example:
RP/0/RP0/CPU0:router(config-ldp)# vrf
red session downstream-on-demand
with ABC
Step 4 Use the commit or end command.
Related Topics
Downstream on Demand, on page 21

Redistributing MPLS LDP Routes into BGP

Perform this task to redistribute Border Gateway Protocol (BGP) autonomous system into an MPLS LDP.
SUMMARY STEPS
1. configure
2. mpls ldp
3. redistribute bgp
4. end or commit
5. show run mpls ldp
Purpose
Enters downstream on demand label advertisement mode. The ACL contains
the list of peer IDs that are configured for downstream-on-demand mode.
When the ACL is changed or configured, the list of established neighbor
is traversed.
commit—Saves the configuration changes and remains within the
configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the configuration
session.
• No—Exits the configuration session without committing the
configuration changes.
• Cancel—Remains in the configuration session, without committing
the configuration changes.
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
Redistributing MPLS LDP Routes into BGP
67