Superior BGE18NV Installation And Operation Instructions Manual page 19

7. For LBG36-SM, the front right and left
logs are longer and are supported with
brackets on each end (see Figure 21).
Place left and right small front logs
under left bracket and beside right
bracket.
8. For LBG36-SM, position left and right
control cover logs as shown in Figure 22,
page. These may be placed as desired
to hide controls.
LBG(18,24,30)-SM MODELS
LBG36-SM MODELS
Figure 22 - Correct Log Placement
CONCRETE LOG MODELS LBG
(18,24,30) BM
Note: Your appliance may vary from model
shown but log placement will be the same.
1. Place fiber ramp log in center of chassis
as shown in Figure 38, page. The fiber
ramp log can be identified by the shape
and much lighter weight when compared
to the other logs. The log must sit flat on
the black sheet metal and behind the left
metal tab as shown. Make sure the side
marked ''BOTTOM'' is setting down.
Ramp Log
Metal
Tab
Figure 38 - Installing Fiber Ramp Log
126827-01A
INSTALLATION
Continued
www.SuperiorFireplaces.US.com
2. Place front left (18" D-064, 24" D-057 & 30"
D-038) and front right (18" D-065, 24" D-058
& 30" D-039) logs as shown in Figure 39.
Right Front Log
Left Front
Log
Figure 39 - Installing Left/Right Front Logs
3. Place left ember bed log (18" D-073, 24"
& 30" D-048) as shown in Figure 40. The
log has groove on one side that sets on the
ember bed pan. The back side of this log
needs to rest against the front of the base
assembly. Make sure the flame from the
ember pan does not touch the ember bed
log.
Figure 40 - Installing Left Ember Bed Log
Left Ember
Bed Log
19