Replacing Remote Control Batteries - Code Alarm CA 1550 Owner's Manual

Replacing Remote Control Batteries
1-Way 4 Button Remote Control:
The batteries (model CR2016) inside each remote control should last approximately 1
year under normal use. When the batteries become weak you will notice the remote
control range (the distance from the vehicle the remote control will work) deteriorate
and the small LED on the remote control will dim. To replace the remote control
batteries:
1. Remove 3 screws and disassemble the halves of the remote control.
2. Remove
the old batteries, observing the +/- symbols on the batteries and
replace with new CR2016 batteries.
3. Reassemble the halves of the remote control and install the 3 screws.
4. Test operation of the remote control.
2-way LCD Remote Control:
The CR2450 battery inside the 2-way LCD remote control should last approximately 6
months under normal use. When the batteries become weak you will notice the
remote control range (the distance from the vehicle the remote control will work)
deteriorate and the BATTERY icon on the LCD remote control will show.
1. Gently slide the battery
cover
off of the remote control.
2. Remove
the old CR2450 battery, observing the +/- symbols on the battery, and
replace with a new CR2450 battery.
3. Gently slide the battery cover on to the back of the remote control.
4. Test operation of the remote control.
2009 Audiovox Electronics Corporation. All rights reserved. 11