Using Your Remote Control; Arming The Security System; Passive Arming Bypass; Bypassing The Shock Sensor - Code Alarm CA 1550 Owner's Manual

Using Your Remote Control
Arming the Security System
To arm the system, exit the vehicle, close all doors, then press the
(1J
button. The
parking lights will flash 2 times, indicating the system is armed, has locked the
doors (if equipped and connected) and activated the starter disable feature. The
LED status indicator will blink steadily, once per second.
NOTE: The system is defaulted with Silent Choice enabled, which requires a
second press of the
[IJ
button to activate an audible arming response from the
vehicle.
Passive Arming Bypass
If passive arming is enabled on your system, while the system is disarmed, press
~ + ~»)),
the system will respond with 1 chirp and the LED will turn on. The
security system will remain in this temporally bypassed state for as long as you
wish. To exit passive bypass, press the
8
or
Cd
button and the system will return
to normal status.
Bypassing The Shock Sensor
To arm the system and ignore the shock sensor press
l2J
button, then within 5
seconds press
&:l
+
~»)) ,
the system will respond with 1 long chirp.
NOTE: The system will only change the shock sensor setting for one arm cycle
and will be defaulted back to normal operation the next time the system is armed.
Hidden Alarm Function
Press the ~»)) button first, within 3 seconds press the [IJ button to activate the
hidden alarm function. The security system will arm with "Hidden Alarm Function"
in which the siren / horn will be silenced if the system is triggered.
Disarming the Security System
To disarm the system press the ~ button. The parking lights will flash 1 time,
indicating the system is disarmed and has unlocked the doors (if equipped and
connected) .
NOTE: The system is defaulted with Silent Choice enabled, which requires a
second press of the (if button to activate an audible arming response from the
vehicle.
·Throughout this manual, 'press' refers to pressing for less than 1 second; 'press and hold' refers to pressing for more
than 2 seconds.
2009 Audiovox Electronics Corporation. All rights reserved. 3