Set Up & Programming - Code Alarm CA 1550 Owner's Manual

2 way lcd vehicle security and keyless entry system professional series

Hide thumbs Also See for CA 1550:

Table of Contents

Set Up

Programming

Transmitter Programming - Feature Bank 1

1. Turn the ignition ON.

2. Press and hold the valet/override button.

3. Within 10 seconds the system will chirp (3) three times.

4. Press 1 button of each transmitter you wish to program.

5. The system will respond with 1 chirp for each accepted transmitter.

6. Pressing the override button at anytime during programming will advance to the

next bank.

NOTE: The system will exit transmitter programming after 15 seconds of inactivity.

NOTE: This system has 1 button programming which programs all channels of the

system.

NOTE: The system will hold up to 4 transmitters in memory, programming a 5th

transmitter will erase the oldest transmitter in memory.

Transmitter programming for 2 Car Mode *2 way transmitter only:

1. Enter the transmitter into 2 Car Mode. (Refer to transmitter operation in the

owners manual for 2 car operation)

2. Follow the steps above for transmitter programming.

NOTE: 2 car mode requires an additional security system installed in a second

vehicle.

Manual Feature Programming - Feature Bank 2 & 3

1. Turn the ignition ON.

2. Press and hold the valet/override button.

3. Within 10 seconds the system will chirp (3) three times.

4. Use the valet/override button to advance through each option bank. For

feature programming advance to Feature Bank 2 or 3, which is (4) four and (5)

five chirps.

5. Use the transmitter

button to scroll through the selections in each feature

bank, the system will chirp to match the feature number.

6. Press the transmitter @ button to change the desired feature. The LED will

flash indicating the changed feature.

Table of Contents

Chapters

Table of Contents