Programming Feature Banks; Adjusting The Shock Sensor; Testing The Shock Sensor; Dome Light Delay Theater Dimming - Code Alarm CA 1550 Owner's Manual

2 way lcd vehicle security and keyless entry system professional series

Hide thumbs Also See for CA 1550:

Table of Contents

Adjusting the Shock Sensor

1. Increase sensitivity by turning the adjustment dial clockwise.

2. Decrease sensitivity by turning the adjustment dial counter clockwise.

Testing the Shock Sensor

Arm the system and wait 6 seconds for the zone to stabilize, then firmly strike

the vehicles bumper.

Chirp Delete - User Accessible

System ARM/DISARM chirps can be toggled ON or OFF without entering the

programming feature banks.

1. Turn the ignition ON then OFF.

2. Press and release the valet/programming button 3 times. The system will

respond with 1 chirp for ON or 2 chirps for OFF.

Dome Light Delay

Theater Dimming

The system can be programed to delay arming after the lock button is pressed (60

second max) for vehicles with a dome light delay or theater dimming feature. Once

programed the system will 'learn' the timing of the dome light delay and add 2

seconds before arming.

1. Close all doors with ignition off.

2. Using the transmitter press LOCK, UNLOCK, LOCK ,UNLOCK, LOCK,

UNLOCK, LOCK. The LED will light solid to indicate the system has entered

DOME DELAY LEARN MODE.

3. Immediately OPEN then CLOSE the door WITHOUT disarming the

system. The system will then monitor the door trigger wire. Once the dome

light turns off, the system will then add 2 seconds and then exit the learning

mode.

4. The LED will begin to flash indicating the system has exited the learning

mode and is now armed.

Table of Contents

Chapters

Table of Contents