Air hAmmer:
chisels:
scAler:
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product's serial number in the back of the manual near the assembly
diagram, or write month and year of purchase if product has no serial number. Keep this
manual and invoice in a safe and dry place for future reference.
failure to follow all instructions listed below may result in
use compressed air only: Clean, dry, regulated compressed air at no more than
1.
90 PSI. Never use oxygen, carbon dioxide, combustible gases, or any other bottled
gas as a power source for this tool.
for technical questions, please call 1-800-444-3353.
SKU 95801
specificAtiOns
Overall dimensions: 7-1/4" L X 2' W X 6-1/2" H
Activation method: Trigger squeeze design.
Net weight: 3.35 lb
Air inlet: 1/4" - 18 NPT
Air Consumption: 4 CFM
Maximum Operating Pressure: 90 PSI
Types: 1 - Ripping Chisel
1 - Cold Chisel
1 - Punch Chisel
1 - Panel cutter Chisel
Dimensions:
Shanks: 0.395" ~ 397"
Bore: 0.401"
Lengths: 4-3/4" ~ 4-7/8" L
Net weights: 3.10 ~ 3.25 oz.
Overall dimensions: 9" L X 1-7/8" O.D.
Needle quantity: 19
Needle dimensions: 7-1/8"L X 1/8" O.D. X 3/16" Head O.D.
Net weight: 2.05 lb.
save this manual
generAl sAfety rules
reAd And understAnd All instructiOns
serious injury.
sAVe these instructiOns
wArning!
Page 2