Download
Share
Print this page
Central Pneumatic CENTRALPNEUMATIC 98580 Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. Central Pneumatic Manuals
  4. Power Tool
  5. CENTRALPNEUMATIC 98580
  6. Owner's manual & safety instructions

Central Pneumatic CENTRALPNEUMATIC 98580 Owner's Manual & Safety Instructions

Pistol grip air shear
Hide thumbs

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
pistol grip air shear
11j
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
©
Copyright
2011 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SaVE thiS manual.
ITEM 98580

Advertisement

loading

Related Manuals for Central Pneumatic CENTRALPNEUMATIC 98580

Summary of Contents for Central Pneumatic CENTRALPNEUMATIC 98580

  • Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SaVE thiS manual.

  • Page 2: Table Of Contents

    table of contents Safety ............2 Maintenance ..........12 Specifications ..........6 Parts List and Diagram ......14 Setup ............7 Warranty ............ 16 Operation ........... 10 WaRninG SymBOlS anD DEFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
  • Page 3 personal Safety 1. Stay alert. Watch what you are doing and 5. Do not overreach. use common sense when operating the tool. keep proper footing and balance at all times. Do not use the tool while tired or under the Proper footing and balance enables better influence of drugs, alcohol, or medication.
  • Page 4 Service 1. Tool service must be performed only 3. use only the lubricants supplied with the by qualified repair personnel. tool or specified by the manufacturer. 2. When servicing a tool, use only identical replacement parts. use only authorized parts. air Source 2.
  • Page 5 Specific Safety instructions 1. The warnings and precautions discussed in this 3. Obey the manual for the air compressor manual cannot cover all possible conditions and used to power this tool. situations that may occur. It must be understood 4. Install an in-line shutoff valve to allow by the operator that common sense and caution immediate control over the air supply in an are factors which cannot be built into this...

  • Page 6: Specifications

    Functional Description Specifications Maximum Air Pressure 90 PSI Cutting Capacity Up to 18 gauge sheet metal Air Inlet 1/4″ -18 NPT Maximum Speed* 1800 SPM Average Air Consumption 4 CFM @ 90 PSI Recommended Hose Size 3/8″ Replacement Blades Item 98948 (sold separately) * Maximum speed at stated maximum air pressure.

  • Page 7: Setup

    initial tool Set up/assembly Read the EntiRE impORtant SaFEty inFORmatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
  • Page 8 Page 8 For technical questions, please call 1-800-444-3353. Item 98580...
  • Page 9 Item 98580 For technical questions, please call 1-800-444-3353. Page 9...
  • Page 10 Operating instructions Read the EntiRE impORtant SaFEty inFORmatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. inspect tool before use, looking for damaged, loose, and missing parts. if any problems are found, do not use tool until repaired.
  • Page 11 General Operating instructions If an automatic oiler is not used, add a few 6. If the tool requires more force to accomplish drops of Pneumatic Tool Oil to the airline the task, verify that the tool receives sufficient, connection before use. Add a few drops unobstructed airflow (CFM) and increase the more after each hour of continual use.

  • Page 12: Maintenance

    user-maintenance instructions procedures not specifically explained in this manual must be performed only by a qualified technician. tO pREVEnt SERiOuS injuRy FROm acciDEntal OpERatiOn: turn off the tool, detach the air supply, safely discharge any residual air pressure in the tool, and release the throttle and/or turn the switch to its off position before performing any inspection, maintenance, or cleaning procedures.

  • Page 13: Troubleshooting

    troubleshooting problem possible causes likely Solutions Decreased output. 1. Not enough air pressure and/ 1. Check for loose connections and make sure that or air flow. air supply is providing enough air flow (CFM) at required pressure (PSI) to the tool's air inlet. Do not exceed maximum air pressure.

  • Page 14: Parts List And Diagram

    parts list and Diagram plEaSE REaD thE FOllOWinG caREFully THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS qUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS qUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
  • Page 15 assembly Diagram Item 98580 For technical questions, please call 1-800-444-3353. Page 15...

  • Page 16: Warranty

    90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.