Table of Contents
Advertisement
Construction:
Air Inlet:
Average Air
Consumption:
Regulator:
Dimensions:
IMPORTANT: This tool may cause damage to materials or paints that soften when exposed to the
heat generated during use (such as acrylic lacquers). For this reason, we strongly recommend that
it not be used on these types of materials.
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
WARNING: When using tool, basic safety precautions should always be fol-
lowed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
Keep work area clean. Cluttered areas invite injuries.
1.
Observe work area conditions. Do not use machines or power tools in
2.
damp or wet locations. Don't expose to rain. Keep work area well lit. Do not
use electrically powered tools in the presence of flammable gases or liquids.
Keep children away. Children must never be allowed in the work area. Do
3.
not let them handle machines, tools, or extension cords.
Store idle equipment. When not in use, tools must be stored in a dry
4.
location to inhibit rust. Always lock up tools and keep out of reach of
children.
Use the right tool for the job. Do not attempt to force a small tool or
5.
SKU 93048
For technical questions and replacement parts, please call 1-800-444-3353
Specifications
Cast Aluminum with
Steel Parts
1/4" - 18 NPT
4.5 CFM
Internal Air Regulator
8-1/2"L x 2" Diameter
Save This Manual
Safety Warnings and Precautions
Eraser Pads:
Operating Pressure:
No Load RPM:
Spindle Threads:
Net Weight:
(4) 3-1/2" Dia. x 5/8"
Thick Soft Rubber
Pads
90 PSI
3100 RPM
5/16" x 24
3.08 LBS.
REV 05i
Page 2
Advertisement
Table of Contents
