Table of Contents
Advertisement
note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram on page 8 of this manual.
wArning! Make sure the Power Switch of the tool is in its "OFF" position and
that the tool is unplugged from its air supply before making any adjustments to the
tool.
1.
Insert the Chisel (17) you wish to use through the Spring (16) and into the front of the
Cylinder (13). Twist the Spring (16) onto the threaded front of the Cylinder (13).
nOte: When twisting on, exert pressure on the hook at the front of the Spring (16).
When twisting off, exert pressure on the hook at the back. Doing so allows for easy
on, easy off application. See figures 2 & 3
13
2.
Insert Cylinder (13) over the Plunger (14) and the Valve (15) and carefully twist the
Cylinder (13) into the Air Housing (1).
figure 3
for technical questions, please call 1-800-444-3353.
SKU 95801
Assembly instructiOns
use As Air hAmmer/chisel
figure 2
16
13 14
Front Hook
17
17
1
15
16 Rear Hook
Page 6
Advertisement
Table of Contents
