Pride Mobility Ultimate 3 Owner's Manual page 31

V I I . C O M F O R T A D J U S T M E N T S
POWER SEAT (OPTIONAL)
Your scooter may be equipped with a power seat. The power seat actuator is designed to raise or lower the seat
automatically with minimal effort on the part of the operator.
WARNING! The power seat is intended for operation only while your scooter is stationary
and on a level surface. Its purpose is to aid you in reaching objects.
Strict adherence to the following safety rules is vital to your safety:
n
Do not attempt to raise or lower the seat while in motion!
n
Operate the power seat only on level ground.
n
Do not operate your scooter with the power seat elevated.
n
It is recommended that the scooter be driven only with the seat in the lowest
position.
Raising and lowering the power seat when traveling or when on an incline could cause the
scooter to tip over, resulting in serious injury and/or scooter damage. Keep the power seat
in its lowest position when traveling or when on an incline.
NOTE: Use of the power seat option will drain the charge on the batteries.
Operating your power seat:
1. Ensure your scooter is level and stationary.
2. Toggle on the power seat switch that is located on the tiller console.
3. To raise the power seat, place your hands on the handgrips and use your thumb to push the right side of the
lever.
4. Release the lever when you have attained your desired height.
5. To lower the power seat, place your hands on the handgrips and use your thumb to push the left side of the
lever.
6. Release the lever when you have attained your desired height.
7. Ensure your seat is in the lowest position and toggle off the power seat switch before you attempt to drive your
scooter again.
Ultimate 3-4/Rev A/July03 31