Pride Mobility Ultimate 3 Owner's Manual page 20

Lights Switch
This three-position switch controls your scooter’s front (upper), front (lower), and rear running lights.
n Toggle the switch forward to turn on your scooter’s running lights and front (upper) light on.
n When the toggle switch is in the middle position, your scooter lights are off.
n Toggle the switch rearward to turn on all your scooter lights, including the front (lower) light.
Horn Buttons
Your scooter must be turned on for the horn to be operational.
n These buttons activate a warning horn.
n Do not hesitate to use the warning horn when doing so may prevent accident or injury.
Hazard Lights Switch
This switch activates the 4-way flashers on your scooter.
n Toggle the switch forward to turn on the flashers.
n Toggle the switch rearward to turn off the flashers.
Turn Signal Buttons
n Press the appropriate turn signal button once to activate it.
n Your scooter’s turn indicators are timed to shut off automatically.
Status LED
The Status LED will alert you to electrical problems that may occur with your scooter. The LED remains constantly lit
while your scooter is on. If your scooter develops an electrical problem, the status LED will flash a code. See X. “Basic
Troubleshooting.”
TILLER CONSOLE FUSES
These fuses help protect your scooter’s front lighting, turn indicators, and key switch console systems from
receiving an overload of electrical current. The fuses used in your scooter are the same type used in automobiles.
See XI. “Care and Maintenance” for fuse replacement.
Figure 5A. Tiller Console Fuses
20
I V . Y O U R S C O O T E R
3-AMP KEY SWITCH FUSE
3-AMP RIGHT SIDE RUNNING
LIGHTS FUSE
3-AMP LEFT SIDE RUNNING
LIGHTS FUSE
3-AMP LEFT TURN SIGNAL FUSE
3-AMP RIGHT TURN SIGNAL FUSE
Ultimate 3-4/Rev A/July03