Braun WelchAllyn ThermoScan PRO 4000 User Manual page 42

6021360_PRO4000_S4-46 Seite 42 Montag, 20. August 2007 8:46 08
How to use Braun ThermoScan
English
1.
To help to ensure accurate readings, make sure the probe tip and
lens are clean and a new, clean probe cover is in place before
each measurement.
2.
When the probe cover is in place, the thermometer turns on
automatically. Wait for the ready signal beep.
_
Fit the probe snuggly into the ear canal, then push and release the
Start button.
4.
If the probe has been fitted correctly into the ear canal during the
complete measuring process, a long beep will signal the end of the
measuring process. You can be assured to have taken an accurate
temperature reading. The thermometer detects that an accurate
temperature measure-ment has been taken.
If you take the temperature of another person, the «ExacTemp»
light can be of help. It flashes during the measuring process as
long as the probe is correctly positioned, and lights up continu-
ously when the thermometer detects that an accurate reading has
been taken.