Siemens Multi Panel MP270 SIMATIC HMI Equipment Manual page 81

Create labeling strips
Only use transparent foil to create your own labeling strips so that the LEDs in the
function keys remain visible. Label the foil either with a printer or a waterproof
felt-tip pen. Cut the strips according to the specifications depicted in Figure 8-4 .
18.5
Figure 8-4
File
The configuration software ProTool contains formatted patterns for labeling
function keys individually for various operating units. The patterns are stored on
the Installation CD in \UTILITY\SLIDExx.DOC in Word
This enables labeling strips to be created for the MP270 for specific systems
without extensive design and printing operations.
MP270 Equipment Manual
Release 01/99
LED window, transparent
(2x)
Labeling strip dimensions
Unit Description
18.5
(8x)
Details:
6.3
16.5
format.
8-7