Message Buffer - Siemens Multi Panel MP270 SIMATIC HMI Equipment Manual

5.2.4

Message Buffer

Purpose
The message buffer displays all message events allocated a time stamp. It is
possible to configure the sorting sequence displayed. Open message buffers are
constantly updated.
Structure
In order to have access to the message buffer for event messages and/or alarm
messages on the MP270, the following functions must have been configured:
for event messages: Show_event_message_buffer
for alarm messages: Show_alarm_message_buffer
Figure 5-3 illustrates an example of the alarm buffer.
Figure 5-3
MP270 Equipment Manual
Release 01/99
Alarm buffer (example)
Operating Special Screen Objects
5-9