Suzuki DF200 Service Manual page 84

FUEL VAPOR SEPARATOR
The fuel vapor separator incorporates a float system that maintains a constant fuel level inside the separator
chamber.
As the fuel level decreases, fuel flows into the vapor separator from the low pressure fuel pump.
The function of this unit is to separate vapors from fuel delivered by the low pressure fuel pump or fuel
returned from the fuel pressure regulator.
This vapor is routed through the evaporation purge system to the air intake silencer case. (See page 3-26
for the Evaporation purge system.)
HIGH PRESSURE FUEL PUMP
The high pressure fuel pump is an "integral" type in which the pump mechanism is located within the fuel
vapor separator.
To supply the optimum fuel amount, the pump is driven by the duty cycle signal from ECM.
Needle valve
Valve seat
Float
Chamber
Fuel pressure
regulator
Fuel return
Fuel drain screw
High pressure
fuel pump
Suction filter
Vent screw
Fuel inlet
Fuel drain
ENGINE CONTROL SYSTEM
Evaporation
Fuel outlet
3-23
Fuel
return