Using Your Remote Transmitter; Turning On The Vehicle Headlights; Using The Car Finder Feature; Personal Protection Alarm (Panic) - Code Alarm PowerCode PC 7300 Owner's Manual

4

Using Your Remote Transmitter

Press LIGHTS, then
press START within
3 seconds for remote
Start/Stop operation
Press to turn on
Rear Defroster*
Press to turn on
headlights

Turning on the Vehicle Headlights

Press LIGHTS button to turn on the vehicle headlights. The lights will
stay on for 20 seconds, or until LIGHTS is pressed again.

Using the Car Finder Feature

Press PANIC on the remote control to locate your vehicle.
The horn will emit five short "honks" each time the button is pressed.

Personal Protection Alarm (Panic)

Press and hold the PANIC button to activate the vehicle horn and
parking lights for 30 seconds. (If the vehicle horn is connected, the
horn will "honk" for 30 seconds.) Press any remote control button to
turn off the Panic alarm.

Remote Start / Stop Feature

Press LIGHTS, then press START within 3 seconds on the remote
control. If all safety parameters are correct, the engine will start within
5 seconds (diesel engines will take longer.) Press and hold START again
to turn off the vehicle. (Turn to page 6 for more on remote start features.)
Using Second Car Mode
If this feature is enabled, one transmitter will control two vehicles
equipped with a PowerCode PC 7300
second vehicle, press the shift button, then within two seconds,
press the desired function button.
* Throughout this manual, 'press' refers to pressing for less than 1 second; 'press and hold' refers to pressing
for more than 1 second.
†
If you have chosen the Silent Arming Option, the horn will not sound when locking or unlocking until the
appropriate button is pressed a second time.
Press for Car Finder
Press and Hold for
Panic Alarm
Press for two-car
operation (SHIFT)
TM
system. To operate the