Transmitter Programming; Manual Feature Programming - Code Alarm professional series PROCOMP Installation Manual

Manual Feature Programming - Feature Bank 3 - 5
1. Turn the ignition ON.
2. Press and hold the valet/override button.
3. Within 10 seconds the system will chirp (3) three times.
4. Use the valet/override button to advance through each option bank. For feature
programming advance to Feature Bank 3, 4 or 5, which is (5) five, (6) six and (7)
seven chirps.
5. Use the transmitter
LCD HHU) to scroll up through the selections in each feature bank, the system will
chirp to match the feature number.
6. Press the transmitter
flash indicating the feature setting.
Defaulting All Features: Pressing the
banks will default all features and return you to feature bank 3 - 4 chirps.
NOTE: The system will remain in programming mode as long as the ignition is on,
there is no time limit. To exit programming turn the IGNITION OFF.
Feature Bank 1 - 3 Chirps

Transmitter Programming

Refer to transmitter programming.
Feature Bank 2 - 4 Chirps
RF Programming ( Optional RF programmer required )
Feature not available on this model.
2012 Audiovox Electronics Corporation. All rights reserved.
button to scroll down or the
button to change the desired feature. The LED will
button anytime while in any of the feature
button ( on the
+
27