Advertisement
2 Way Remote Control Notifications
FUNCTION
Activation
Confirm Remote Start
Remote Start Running
Remote Start Shutdown
Low Battery
Transmitter Programming
1.
Turn the ignition ON.
2.
Press and hold the valet/override button located on the antenna.
3.
Within 10 seconds the LED's will begin to flash.
4.
Press 1 button of each transmitter you wish to program, the LED's will
flash to confirm each transmitter.
5.
Turn the ignition OFF
NOTE: This system has 1 button programming which programs all channels of the
system.
NOTE: The system will hold up to 4 transmitters in memory, programming a 5th
transmitter will erase the oldest transmitter in memory.
4
BEEPS / LED FLASHES
1 Beep / Flash
4 Beeps / Flashes (repeats 3 times)
1 Flash per 3 seconds for duration run time
3 Long Beep / Long Flashes (repeats 3 times)
2 Beeps / Flashes when button is pressed
2017 Voxx Electronics Corporation. All rights reserved.
Advertisement
