Functions That Can Be Assigned To The Assign. 6 Switch; Functions That Can Be Assigned To The Ret Button - Sony PMW-TD300 Operating Instructions Manual

Assignable switch setting Function
Conv. Near/Far

Functions that can be Assigned to the ASSIGN. 6 Switch

Assignable switch setting Function
Off
Grid(VF)
Depth Warning(VF)
Grid & Depth Warn.

Functions that can be Assigned to the RET Button

Assignable switch setting Function
Off
Lens RET
Rec Review
Shot Mark1
Shot Mark2
OK Mark
Focus Mag
148 Assigning Functions to Assignable Switches
Assign the Convergence Near function to ASSIGNABLE
switch 4, and assign the Convergence Far function to
ASSIGNABLE switch 5 (displays only when setting
"<4>" and "<5>").
No assignment
Turn the grid display in the viewfinder on or off.
Turn the display of the 3D depth warning in the
viewfinder on or off.
Perform one of the following, depending on the
viewfinder settings.
L+R, L-R, R, or Anaglyph: Turn the grid display on or
off.
Left (L) display: Turn the 3D depth warning display in
the viewfinder on or off.
3D display: No change
No assignment
During recording or playback: Write a shot mark.
In the other states: Conduct a recording review (if
playback is allowed).
Execute recording review.
Write Shot Mark1.
Write Shot Mark2.
Add or delete an OK mark.
Turn the focus magnification function on or off.
State when camcorder
is next powered on
—
State when camcorder
is next powered on
—
Setting retained
Setting retained
Setting retained
State when camcorder
is next powered on
—
—
—
—
—
—
Setting not retained