Assigning Functions to Assignable Switches
Using the Assignable Switch item of the Operation menu, you can assign user-specified functions to the
ASSIGN. 0 to 3 switches, the ASSIGNABLE 4 and 5 switches, the COLOR TEMP. button, and the RET
button on the lens.
The following tables lists the functions that are assigned when the camcorder is shipped from the factory.
Switch or button
ASSIGN. 0 switch
ASSIGN. 1 switch
ASSIGN. 2 switch
ASSIGN. 3 switch
ASSIGNABLE 4 switch
ASSIGNABLE 5 switch
RET button
COLOR TEMP. button
Functions That Can Be Assigned to the ASSIGN. 0 Switch
Assignable Switch
setting
Off
Marker
ATW Hold
Focus Magnifier
Zebra
Shot Mark1
Shot Mark2
OK Mark
Clip Flag OK
Clip Flag NG
Clip Flag Keep
Function
No assignment
No assignment
No assignment
No assignment
No assignment
No assignment
Rec Rreview (if playback is allowed)
No assignment
Function
No assignment
Turn the display of all markers on/off.
Hold the white balance setting in the ATW (auto-tracking
white balance) mode
Turn the focus magnification function on/off.
Turn zebra display on/off.
Write Shot Mark1.
Write Shot Mark2.
Add or delete an OK mark.
Add/clear an OK mark to/from the clip being recorded or
played.
Add/clear an NG mark to/from the clip being recorded or
played.
Add/clear a KP (Keep) mark to/from the clip being
recorded or played.
140
Assignable Switch setting
Off
Off
Off
Off
Off
Off
Lens RET
Off
State when camcorder
is next powered on
—
Setting retained
—
Setting not retained
Setting not retained
—
—
—
Setting not retained
Setting not retained
Setting not retained